I would use OSB 11mm on the inside and that is your vapour barrier. Not 100% but close enough for the workshop.
Then insulation between the studs.
Then wrap the outside of the stud work with a breather membrane which lets any trapped moisture escape.
Then batten and clad but not OSB on the...
I used to have a Kipor 7kw diesel generator as a backup for a small backup data centre we ran out of our garage. Here are a few thoughts, a DIY install might be more problematic than back in the day but here we go.
I installed a changeover switch between the main 100a fuse and the old style...
I have the Drayton Wiser system. About 8 rad valves and two room thermostats.
Does what it says on the tin. Have very specific room temperature schedules. Can change things remotely.
Only thing is the valve thermostats aren't hugely accurate, I guess cos they are close to in some instances a...
I could almost think this thread had been written by a friend of mine! He has half a dozen flats and has just been through the electrical certification process.
He's of no doubt that he was being ripped off. Failure for not having a sticker at each site and the sparkie wanting to re-inspect (he...