Molynoox's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    today made a good start on the bench dogs. the 19mm forstner came so I ripped some thin sections sapelle on the bandsaw, these will form...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Love Love.
    Good question! been thinking about it. a lot! I would estimate 40hours solid work so far based since August, most of that was planing it...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    OK! managed to sort that mistake out. I chopped off the end cap just enough to allow it to lever onto the dovetail. then I cut a...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    managed to steal a bit more time on this. have dismantled the old thing I'd been using which served me well whilst I decided if I...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Love Love.
    I've finished the leg frames and they have a coat of osmo polyx on them. I messed up one of the mortices (the lower taller ones) I think...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    made a good start on the leg frames. I made the new legs square and coplaner ready to accept the mortices. the legs are approx 6x5"...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    not much progress thanks to the mewling one but I've infilled the initial vice cutaway in favour of housing it in the apron. I did a...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    so the top did this in sections so initially scrub planed the stock then refined this before using the jointer plane then glue up...
  • Molynoox
    Molynoox reacted to Pabs's post in the thread Workbench Project with Like Like.
    Been quiescent for a few weeks thanks to work being busy but finally have some bits for the new workbench built up. In addition the...
  • Molynoox
    Molynoox reacted to Arthur Dent's post in the thread My first workbench with Like Like.
    Hi, This is some pictures of my first ever workbench. It was my first time using planes, cutting half laps and using chisels for some...
  • Molynoox
    Molynoox replied to the thread feasability.
    Well the obvious thing to do would be to cover it with membrane and then battens and then clad it with tongue and groove or composite or...
  • Molynoox
    Molynoox replied to the thread feasability.
    Cement boards like fermacell. You can paint it to look a bit nicer.
  • Molynoox
    Molynoox reacted to Doug71's post in the thread Sack Truck, Folding Workbench with Like Like.
    Just seen this from Ryobi, looks quite handy for transporting toolboxes then using as a quick work surface...
  • Molynoox
    Here in Bulgaria, the post - and courier services - won't take firearms. As a shooter, I find it amusing that they're quite happy to...
  • Molynoox
    Very interesting thread to follow. Loving the planning and attention to detail. 👍 Martin
Back
Top