Recent content by Meader 1

Hi, The boards are 20mm thick so would 400mm centres be fine for these? What type of screws would you use as we don't want ugly screw heads but we want them to be secured without too much movement? I was suggesting 40mm screws as the boards are 20mm and the battens we are fixing too are 25mm...

Hi, Thanks for this. I think 50mm timber will be too much so perhaps 20mm battens may work. It will mean that there will be a difference from the lounge/Kitchen to the Bathroom where we will be laying tiles. This will have to be made up so there will be no lip/step. We are lucky in as much it...

Thank you Jacob, I assume you mead once nailed to the batten the weight of the timber should hold it all down and in place? Are able to help with what centres I should set the battens at and also what type of nails. Thanks Steve

Hi, I am looking to fix Reclaimed floor boards which I think are pine onto a flood concreted screed which is very level but has wet underfloor heating within. I did think of the idea of fixing battens should I not be able glue them directly onto the screed. Is there a glue I can use as I will...