I'm in the process of re-cladding the front of my workshop which had decayed over time due to poor maintenance by the previous owner. I've picked up some British cedar tongue and groove cladding around 140mm wide to be attached vertically. The underlying framing is 4x2 treated timber with 12mm...
Guys,
A massive thanks to all who replied. With regard to putting a good coat of preservative on the ends of the jambs, is there any particular type/brand that you would recommend?
Also, with regard to epoxy fillers do these go onto the bare onto the wood or do I need to put preservative or...
Hi all,
I have a lean-to on the back of my house and the door jambs have rotted at the bottom around 300 to 400mm in length. The construction of the
lean-to is horrible - it's an old 1970s timber frame which we intend to rebuild it in a few years so there is no point spending any more time
and...