Recent content by Ian Mellin

Description Neilsen 4pc Professional Wood Gluing Pipe Clamp Woodworking Cast Iron 3/4" Set Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling. Constructed of tough cast iron that keeps wood steady as you work. Four plate clutch for high...

Description Neilsen 4pc Professional Wood Gluing Pipe Clamp Woodworking Cast Iron 3/4" Set Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling. Constructed of tough cast iron that keeps wood steady as you work. Four plate clutch for high...

Hello, I have purchase some pipe clamp ends to make pipe clamps. One end of the pipe has to be threaded for the clamp to work. The pipe required is 3/4 inch O/D. Does anyone know a reasonably priced supplier of such pipe. I'm looking for 3 meter lengths. 12 lengths in total. Any hints much...

I finally found the manual after alot of digging. The Cantilever mechanism is clearly shown on the AGS-P manual attached if anyone is interested. Kind Regards Ian.

Hello the previous riving knife attachment at the start of this post is not correct for my saw, mine is one of the more modern saws with a cantilever mechanism. Does anyone have the manual for this model of machine as the ones on the Wadkin site make no mention of this that i can find. Any...

Please can someone please post some pictures of the attachment and how it attaches to the saw and operates. I have the attachment but done know if I'm missing some parts, so the more photos the merrier. Kind Regards Ian.

Hello, I have a phase converter made by a company called motor run. Mine is a static phase converter none of this noisy additional motor running dynamic stuff, just a quiet hum which will run anything up to and including 8hp. Thier web site is [email protected] The chap makes the...

Sorted took a morning to adjust now working correctly.

Do you know what torque setting is need?

Agreed, I do this with my band saw, works perfectly every time.

Hello. Look at a u tube video by Alex snodgrass, I use this method all the time, never have any issues. Regards Ian

Hello, I have restored a wadkin BOAS/12. I need some advice on setting up the plainer thicknesser to get the in feed and out feed rollers set to the correct height as per the manuals that you can download (See Attached) The manual says the in feed roller should be 3mm below the cutter head...

"]Acquired this machine a few weeks ago. Early eighties version. Machine No. 12"BAO/S 825347. Nice clean example with original paintwork. I need to convert it to run on 240v single phase supply and change the cutterblock to a Shelix spiral one. hello, i have a BOAS 12 plainer thicknesser the...

Do you also have any spare inboard face plates ? If so are you willing to sell ? Regards Ian.