Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Ged S's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  • G
    Ged S reacted to bjm's post in the thread Veneered box WIP - picture heavy. with Like Like.
    OK folks, as promised here is how this box was made. For those with a very short attention span, look away now!!! I'm...
  • G
    Ged S replied to the thread MFT worktops, uses etc.
    Also
  • G
    Ged S replied to the thread MFT worktops, uses etc.
    There's a bloke on youtube who's made up his own using a couple of butt hinges. It looks pretty good - I’ve been meaning to try it out...
  • G
    Ged S replied to the thread MFT Question.
    Given that you already have the parf guide system and assuming your benchtop is about 18mm thick (so that you can feed the festool type...
  • G
    Ged S replied to the thread Nail Gun.
    +1 for the Aldi gun. I’ve had the Ferex (lithium battery) gun for about a year and it’s been fine. Reliable, portable and not too heavy...
  • G
    Ged S replied to the thread Kitty Best Combi 2000.
    No probs
  • G
    Ged S reacted to Dhenry's post in the thread Kitty Best Combi 2000 with Like Like.
    On my Bestcombi there is a start button at both ends of the machine. The button at the spindle moulder end (It’s next to the rotary...
  • G
    Ged S replied to the thread Kitty Best Combi 2000.
    I used to have one of these. Following up on Dhenry's point, the 2000 also has a red stop button at each end, with a safety interlock...
  • G
    Ged S reacted to Oddbod70's post in the thread Nail finder with Like Like.
    Ouch! It happens more than you might think. I don't do anything like a serious amount but a season won't go by without it happening...
  • G
    Ged S replied to the thread Nail finder.
    I use reclaimed timber almost exclusively: I first deal with any obvious nails, screws bolts etc etc, then go over it with a coarse belt...
  • G
    Ged S reacted to scholar's post in the thread Nail finder with Like Like.
    I don’t know about the Little Wizard, but I have a Lumber Wizard (what’s good enough for Norm Abram....). I have found it foolproof and...
  • G
    Ged S replied to the thread Nail finder.
    I've used a 'Little Wizard' metal detector from Rutlands for the last 5 years or so. It has worked well for me on salvaged demolition...
  • G
    Ged S reacted to flying haggis's post in the thread Australian squatters chair with Like Like.
    looks like it should be in a maternity delivery suite....................
  • G
    Ged S replied to the thread Shelf pin drilling/routing system.
    I have the Mk II Parf guide system for drilling 20mm holes a la MFT worktop. As an added advantage, this is perfect for drilling...
  • G
    Ged S reacted to Jonzjob's post in the thread Lazy Susan? with Like Like.
    I made a lazy Susan a while back. 18" diameter, totally made of wood apart from the glue and all turned by me too. That included the 36...
Top