Recent content by Darren7106

Hi all, Quick update. I removed the motor. Stripped it and it was bone dry inside. Put it all back together and it worked. I think there was a dodgy earth attached to the casting behind the NVR switch. So all good and thanks for all your input 👍

Hi John, I changed the switch as the old switch was arcing, I thought it was defective sonI changed it. I suspect its damp in the motor as the NVR is doing the job its supposed to do I think 🤔 Cheers John Darren

Hi Dave, I suspect its damp inside the motor. Shed is bone dry inside bit it's been a good few years since i used it last. I'll strip and try hair dryer. Thanks for your help.

Hi, thanks for the reply. I have already purchased a ML7, I missed the d out in my original post. Thanks for the welcome. Don't suppose you know the reason why my NVR on my pillar drill seems to be shorting out, its not faulty as ive putchased a new one 🤔🙈 Hi Dave, yes it sounds as.if it's...

Hi All, I have recently cleaned out my shed of all the junk and decided to pursue my life long dream and purchase a Myford ML7 lathe. I'm a 55 year old guy from West Wales who plans on locking himself away in his shed and start a new hobby of model making, Toolmaker by trade but left the trade...