Recent content by Chrisp

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Tealight makers dilemma

    B&Q have very similar to the Ikea ones, £3 for 12 I think they are?
  2. C

    Kity 636 planer/thicknesser manual & parts list?

    Pm me your email address, I've just found the one that was sent through to me, the manual isn't great but is interesting to see, any other questions just ask. Regards, Chris.
  3. C

    Grinder dressing

    Bought the cheap one from eBay years ago, still going strong.
  4. C

    Record Power Lathe Assembly

    SBS, This could be in relation to the bed bar supports, the castings have 2 points on one side and one on the other, the clamp on top of the bed bars have the same, they should be positioned in a triangular configuration when clamping, so 2 bumps on one side with the one bump, hope this makes...
  5. C

    Sharpening jig on ebay.

    I have that one, if you message the guy, he has the fingernail jig and also the flat adjustable table, I messaged the guy and he gave me a good price for 2 bases and the 2 different jigs, it's worked faultless for some time now and gives great results, I would post a pic but it doesn't seem to...
  6. C

    Turning books

    Also have a look on Youtube, there are many health and safety screamers out there but also if you use if for a reference is very good, depending on how you learn I find the visual benefits of a dvd better then trying to understand the terminology from a book, having turned for over 20 years I've...
  7. C

    Kregg pocket screws

    Have a look on eBay, lots of Kregg ones and also some silverline ones that look better value.
  8. C

    Double bed slats

    If your using whole width slats, the easiest way to make a centre support is a length of timber from headboard to tail, placed under the slats with 2 or 3 legs screwed in place along the length, no special fittings needed and works well if there isn't any material in the headboard and tail to...
  9. C

    Kity 636 planer/thicknesser manual & parts list?

    Many thanks Argus, pm sent.
  10. C

    Kity 636 planer/thicknesser manual & parts list?

    Morning guys, I know this is an old thread but I picked a 636 up yesterday, and would be interested in a copy of the manual that has been shared around if someone could oblige :-) Regards, Chris.
  11. C

    I need a special piece of equipment

    Peter, There is one on Amazon, unfortunately it's from America! http://www.amazon.com/gp/aw/d/B004TK0JO ... ot_redir=1 regards, Chris.
  12. C

    lathe problem :-(

    Procell, Nope, Tried that also :-( Chris.
  13. C

    lathe problem :-(

    Thanks Taz, Tried that and now it won't run up at all! Hope it's fixable? Chris.
  14. C

    lathe problem :-(

    Not sure if its the capacitor? Or where it is and how to check it, if anyone can help please :-) Chris.
  15. C

    lathe problem :-(

    Thanks Bob, That will be my first call tomorrow, the lathe is defo out of any warranty but have experienced their helpfulness first hand before, just wanted to see if there was something I could check on before tomorrow? Regards, Chris.
Back
Top