Recent content by cammy9r

Confusion perhaps with these types of plugs, the female connectors are in what looks to me as a male plug. Either way, I have done the correct way.

I converted all my tools with black pvc pipe ( long before 3d printers where in Aldi). Just heat it to shape and trim where necessary. Now they all accept the vacuum hose. I also ran a power cable along the hose and fitted a kettle plug (iec 13/14) to it. Then fitted the female end to the tools...

Hi, Cilitbang black mould remover is pretty good at mould removal. Its a bit stronger than the regular bleach. Oiled filled radiators are good for keeping rooms warm and seem safe enough as are tube heaters. It will be difficult to dry anywhere out in winter.

That's clever. I keep telling people it is not hoarding, the stuff is useful and has a purpose. Granted it has taken nearly 35 years for you to find a use for that disco ball :)

Quite a bit of difference in the frame between them both. I wonder if the knock off will perform as well as the Knew Concept. It could be made from a different alloy too. The whole point of this style is the stiffness of the frame is it not. Best thing to do is buy the knock off and report back...

The panel hammers have polished faces. Those are the ones I would be interested in although I think I have most of the hammers I need now. Good to see stubby/compact hammers that are not snap on or martin. The snap on compact is my go to hammer for most dings, it has a nice balance.

I have a bank account set up with not so much money in it just for using online. If it gets hacked then there is no great loss to recover. Maybe the hackers will take pity and put money in it :) I just transfer money over to it when needed, keeps the billions and squillions safe :rolleyes:

Hi, most people who make a sled for the tablesaw just cut there own tracks out of hardwood or some kind of plastic (uhmw plastic). It does not have to have the 't' shape for the rail to work just a snug sliding fit.

Quite sure you misinterpreted and misquoted that, just saying. The chair appears pretty good to me. I probably missed the point you are making.

DW, Who taking things personally? In the end does it really matter at all if someone makes a quick video just to put on youtube just to generate revenue and it works out for them. Pat on the back to them really. The OP question was would you go to effort to save a few quid, for me the answer is...

Hi, Evolution tools have one that has a repositionable belt which could be handy in different situations. I use the B&Decker powerfile and once it dies I will likely go for the evolution. I have used powerfiles for many years in both wood and metal working.

Maybe it is not about the costs involved. Perhaps they just enjoy making things. If they make a video and get ad revenue then good for them. Nobody is forced to watch anything and can easily switch off the video if not interested in the content. I went to quite a bit of effort to produce...

I use PTFE on parallel threads as its a lubricant too. Allows a nice bind free nip up on the olive or whatever. Taper threads get Loctite 55. I have standard thin tape, thicker gas tape and liquid and the 55 and use whatever I see the job needs. Also have boss white and green to hand too.

Hi, at the 300 quid mark they are (seem to be) all clones. rutlands has one as does recordpower and SIP although the SIP10944 is around 100 quid dearer for what looks like the same spec. The recordpower bm16 does come with a 5 year guarantee though. I use it's bigger brother fm25 and it has...

Bad idea. The aim of toe out at the back of the fence is to stop binding of sheets. The distance between the rear of the blade and fence is ever so slightly greater than at the front be it 0.5mm or 1mm. Toe in blade at the rear will bind and cause dangerous situations for you to get yourself out...