Recent content by Bunsen

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Bandsaw blade tracking problem

    The instructions say that the blade should be entered on the wheels so that is what I am trying to do.
  2. B

    Bandsaw blade tracking problem

    I have a Record BS250 bandsaw and have problems with the blade tracking. I set the blade to the middle of the wheels, spin the wheels several times by hand and the blade tracking is fine. When I run the saw under power the blade moves to the front of the wheels and so the bearing setup etc is...
  3. B

    Coronet Herald Power Lead

    Problem solved. Apparently the black box is an EMC filter. Record Power recommend that it is fitted but do say that its existence is not mentioned anywhere in the lathe manuals .
  4. B

    Coronet Herald Power Lead

    I have a Coronet Herald Lathe and have a question about the power supply. The lathe was supplied with a normal "kettle" lead that will plug the lathe directly into the wall socket. There is also a heavy black plastic box with the connections that allow the box to be fitted between the mains...
  5. B

    Record Power Remount Jaws Problem

    RP say their specs are correct!. Apparently that have measured the jaws on a lathe they have in HQ. I asked for a photo showing how to attach the jaws to give the stated dimensions but they said the lathe was in use and they could not provide anything.
  6. B

    Record Power Remount Jaws Problem

    Looks that way. The mistake is in the online manuals and also the specs on the back of the box the parts are supplied in. Copy and paste by the writers I guess but how did it pass the proof read before publishing?
  7. B

    Record Power Remount Jaws Problem

    Thanks for the reply. I think the Record specs in their videos and on the item box are wrong. I've replied to Record with my thoughts and , so far, have not had any reply.
  8. B

    Record Power Remount Jaws Problem

    I have just purchased a set of the large Record Power remount jaws and have a problem with the specification. The specs and Records video show the minimum dimension in expansion mode as 53mm. I can't work out how this can be correct. I have fitted the mounts in the innermost holes and the...
Back
Top