Recent content by bradleyheathhays

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bradleyheathhays

    Thinning down SW exterior paint for HVLP

    Just got myself a gravity feed 1000ml cup HVLP spray gun and I'm preparing to shoot some exterior bright white semi-gloss on some cedar sticks that'll be part of a garden trellis. Although the finish doesn't have to be anywhere close to perfect I'd like to see it go on as best it can, if for no...
  2. bradleyheathhays

    Phar out finishing techniques

    I've just begun collaborating with a local artist who wants to make a fairly large mural out of wood. The idea we've come up with is to design impressionistic type pieces based on arranging square wood blocks into the larger image. The plan is to develop different finishing techniques for the...
  3. bradleyheathhays

    cowpat in the punch bowl

    To make a long story short, I've got to make two Adirondack chairs out of Red Oak and have them ready, painted and presented by Christmas. I've been told by soo many people how bad Red Oak would be for soaking up water and that they'd have to be repainted almost every year, but I have no time...
  4. bradleyheathhays

    On my first two pieces - King's Adirondack chairs

    I'm just starting off on my first two commissioned pieces, two of Mr. King's very fine Adirondack chairs. I visited this particular local lumber yard this past weekend as I thought they had some Eastern Red Cedar that would've worked well, but since it was only 4/4 I ended up going with their...
  5. bradleyheathhays

    How to test drive a chainsaw

    I'm looking at getting a used chainsaw and since I want a 20" bar I'm considering this guy's Husqvarna 450. He sells a good deal of this stuff on marketplace. The pictures of it don't look bad, and I've heard nothing but good things about H chainsaws. So when I go to pick this thing up how do...
  6. bradleyheathhays

    Template sanding bumps

    I'm brand new to making templates and I'm finding out making a good one is not as simple as it looks. Luckily I've got the Ridgid oscillating edge belt/spindle sander to make it easier for me. My problem is making smooth inside arcs. After about an hour of practice my outside arcs or curves are...
  7. bradleyheathhays

    Mitre saw material clamps

    I'm looking to buy this Bosch mitre saw and I'm wondering if the holes shown in the pictures are where the material clamps go. The ad says there's no clamps included so I'll have to get them myself. Are these the clamp holes and are they generally available aftermarket?
  8. bradleyheathhays

    Cursive letter router templates?

    Is it possible to use router templates to do cursive, or cursive-ish writing in wood? I've seen templates that produce sort of block style letters but I can't wrap my head around how cursive templates would work or what they would look like, but I'm not the best visualizer either. Where might...
  9. bradleyheathhays

    Throat plate for table saw mitre

    We've got a Powermatic model 66 in the shop and I'm in the process of cutting our new throat plate for both straight and 45 deg mitered cuts. I made the straight up and down, 90 deg, cut no problem so now I'm faced with making the 45 deg cut. I can't imagine this is done the same way the 90...
  10. bradleyheathhays

    Whatsit spigot part?

    I've got a resin project I'm in the middle of and I'm trying to piece together this liquid epoxy delivery system I've imagined. To deliver the epoxy bubble free I need to suspend the delivery vessel (2 qt pitcher) overhead and drain the epoxy from the bottom leading it down to the mold via a...
  11. bradleyheathhays

    Adapting woodworking skills to another field

    I want to dip my toes into trying some larger resin projects and I think I've decided on the first one. I'm gonna try to replicate a kids table that has a lot of what I think are thin felt circles embedded in the resin. It's possible the circles are made out of something else; felt was just my...
  12. bradleyheathhays

    ID-ing this wood and suggestions for project tweaks

    I'd like to give this project I saw on the tubes a whirl and need some direction because there weren't any instructions included. First he makes the cuts in the second picture, then turns it 90 deg and does the same. 1) Any idea on what wood species this is? 2) Any suggestion for what other...
  13. bradleyheathhays

    Looking for turning profile templates for sale

    Are there any woodworking supply companies that sell profile templates for turned pieces? I've done small turnings without much problem and now I'm about to attempt larger projects. I'm afraid if I don't have something to go by I'll just keep turning the thing further and further looking for...
  14. bradleyheathhays

    Creating custom sanding blocks

    I've got a resin project coming up where I'll need to sand all of the resulting form's epoxy facets from 120-3000 grit. Because the surfaces will be between .75 sq in and 2.5 sq in I need to create very small and lightweight, but absolutely flat sanding blocks. I tried attaching sheets to 1/4"...
  15. bradleyheathhays

    Grout cleaners and advanced puck lights

    It's been so long since I've tried to clean my bathroom grout that I'm hoping there's been an improvement in grout cleaners since I did, so I thought I'd ask yall's opinion on how best to get my grout color back. It's white but fairly darkened now with just general floor dirt over the years. It...
Back
Top