Recent content by belcher

electric fence! then air rifle.

it sounds like your system isn't powerful enough, in our workshop we've got two extractors,1 two bag monster just for the planer and a single bag for the radial arm and sawbench, both would suck a golf ball through a garden hose,i don't know the exact power of them but when the single bag is...

thanks for your help guys, contacted multico via email and they got straight back to me, bolt and bushes still available, result!(good price too)

yes thats the one!i'm missing the bolt, all i have is a nurled ring stuck on a sleeve with a slot cut in one side, i presume the bolt clamps the top of the chisel shank,my machine has been butchered by animal with a disc cutter and a hammer to get the chisel to stay in place,luckily the casing...

i come at things from a fencing background so my approach may be way off but all i did was concrete six large posts(5x4)3m long in the ground about 800mm then build your shed off of those,no need to dig out soil to level the ground,bolt on your floor supports, bolt on your roof using a single...

Hi, does anybody out there own an early multico morticer, i have found two different styles of casing around the chisel housing.My one which i think is an earlier type is rounded and access to the chuck or auger clamp is through two cut out holes.The other type has a door which opens.Advice on...

my one has a rounded front to the casing and access to the chuck is through cutout holes in the side.

my machine looks different to that,maybe it's an earlier model,the nurled ring is threaded onto a sleeve which has a side removed to allow the bolt to pass through,but there's nothing to stop the chisel falling out the bottom,my machine has benn altered because it has a different motor so maybe...

thanks for that, but are there not any sort of tapered cones or anything to grip the chisel because my casted casing has no gap in it to close, so there is nothing to pinch up?

thank you , i am a big fan of well made old tools, i also own a multico planer with a tenoner attatchment,these were built to last.thanks for your assistance.

greetings everyone, i have just got an old multico m1 and in need of the bolt which retains the chisel shank, i believe this is called a cotter bolt?Anybody know where i can get one or have a picture of one dismantled so i can see what i should be looking for, belcher.