Recent content by Alexfn

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Finally DEWALT DW735 on 220v, but still not in UK?

    im now seeing this listed on ebay for silly money, it seems to be available in oz (230v) at reasonable money and its on alibaba coming in at £900 with delivery im trying to downsize all my machines and wanting to get rid of the big cast iron stuff for machines that can go on a shelf. i cant see...
  2. A

    Mitre saw saw with 60°

    yeah they are both a bit too much, i dont want to spend more than 300 really as its going to get a bit of abuse the cheaper the better really but maybe a big ask
  3. A

    Mitre saw saw with 60°

    Hi guys I'm looking for a mitre saw that will go to 60°> I have a kapex but for this use I want to use something less valuable for this work.. I'm only looking for a saw that will do 60° not for advice on how to jig to cut 60 because I know all that. Cheers
  4. A

    need a new battery drill

    its 18v nominal, not 20v its marketing, it has the same 18650 cells in it as every other drill, however all 18v drills will be about 21v when fully charged you needn't have worried about a 12v,a 12v top end drill today will be more powerful than your 10 year old one, as for sayin you needed...
  5. A

    mig welding setting

    hi guys i bought myself a mig welder, the best one i could find for the money came from poland, the only issue now is that i cant see that its possible to set the wire speed in normal meters per minute, when i switch the machine to mig the wire speed dial actually reads out in amps it goes...
  6. A

    Air compressor for nailer

    https://www.aimtools.co.uk/products/241 ... -xdw550-9l https://www.aimtools.co.uk/products/241 ... ressor-24l trade off for a really quiet compressor is low cfm dont get oil free if you want a quiet compressor, the one you linked may have have a low db rating but from 20 years working with...
  7. A

    ALDI Track saw - extra track

    because they are married
  8. A

    Triton TPT125 Planer

    theres an x-demo one on ebay now for 200 for anyone interested mine was fine right up until it failed, suspect motor burned out, was pushing it a bit. i think 1100w is under powered, rumor has it that it is getting replaced in the new year with an 1800w version, might be tempted to give it...
  9. A

    unwanted parf guide system

    3d printed version can be had for 25 quid, they are having a laugh with the price of this
  10. A

    Pneumatic framing nailer / nailgun which one?

    Ace&k if you want a industrial level tool. All mine are ace&k now i have 2 of their flooring nailers that must have done over 100k nails easy without a single jam. Framing nailer i doint use as often but also been great. Wouldnt touch dewalt. Hitachi are fine.
  11. A

    Rutlands Thicknesser XT3520

    still not had time to go back to the rutlands the triton fine for small work, struggled with any wide boards, eventually killed it and wouldnt buy another, i know they are due to bring out a 1800w version and i think it needs that more powerful motor
  12. A

    Rutlands Thicknesser XT3520

    Not had the time to look at it again. Hope to get time tonight or tomorrow. Will update how i get on with the machine and rutlands customer service. At the moment they are encouraging me to strip it right down. I think i must have been just unlucky as if more people had problems they would...
  13. A

    budget chip extractor recommendations

    Ordered the fox. Thanks guys
Back
Top