indian motorcycle

[digerman]

first two are from my imagination
the third one is from a plan by sawbird cut it first then thought i would do a 3d version

 

[Silversam]

You have great imagination. They all look really good. How big are they.

 

[linkshouse]

Very, good.

 

[digerman]

thay are both twenty two inches long by nine high

 

[Silversam]

That’s a good size. The word Indian on the tank. Have you inlayed this into the wood or used some other method. Whatever method you used it looks very professional and I would love to be able to do that. You are very skilled and I have enjoyed looking at them. I have only recently started doing intarsia so I am trying to learn as much as I can. Thanks.

 

[tricksterdude]

These are awesome

 

[digerman]

the names are inlayed stack two bits of the same thickness i use screw nails so they cant move
then tilt your table by about three degrees do a test cut . if you cut in aclockwise direction
the top piece should fit into the bottom piece you might need to alter the angle of table slightly
it depends on what blades you use and the thickness of the wood