Draper 50021 belt disc sander

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mock

Established Member
Joined
25 Jun 2014
Messages
1,467
Reaction score
11
Location
WALES, Nr Neath
Help please i was given this sander Draper 50021 6 month's ago and today i have decided to use it but have noticed the lever for the tension of the belt just flops about i have had a look underneath the belt and there 's nothing there for the lever to connect to so i was hoping that some kind gent on here will take a photo of the underneath next time you change the belt on your draper and post a photo so that i can see what's missing thank's in anticipation :oops:
Alan
 
Do you have the manual for it?

There may be a clue within

If you don't have a manual, just google Draper 50021 manual , there are several out there

The basic machine is the same as many others, including my Axminster version, if you don't get any other picture replies I will have a look in the morning and see if there is anything visible and take a picture
 
Nearly forgot so apologies for the delay

ps that was in the untensioned position
 

Attachments

  • Clip224.jpg
    Clip224.jpg
    158.7 KB · Views: 43
  • Clip223.jpg
    Clip223.jpg
    178.4 KB · Views: 43
  • Clip222.jpg
    Clip222.jpg
    192.8 KB · Views: 43
  • Clip221.jpg
    Clip221.jpg
    134.6 KB · Views: 43
Back
Top