petermillard
Established Member
Hi Folks
In an old ‘workflow’ thread of mine - here - the spreadsheet I used to calculate the carcasses etc.. generated some interest. I’ve recently sanitised this for public consumption and made this simple two-page workbook freely available via Google Sheets, entitled “Single cab.” here - https://goo.gl/0bRMDa - and thought it may be of some use or interest to members here, especially for anyone contemplating say an alcove unit.
NB: The link above is a 'view only' share; please be sure to read the text on the large grey panel that appears (can take a moment sometimes) as it contains instructions on how you should proceed to get hold of your own, editable copy of the workbook.
Anyone with a modicum of spreadsheet/formula experience should be able to figure out what’s going on, but if you need more help there’s a walkthrough video here - https://youtu.be/VwMKHSG88RI
Enjoy!
Best, Pete
In an old ‘workflow’ thread of mine - here - the spreadsheet I used to calculate the carcasses etc.. generated some interest. I’ve recently sanitised this for public consumption and made this simple two-page workbook freely available via Google Sheets, entitled “Single cab.” here - https://goo.gl/0bRMDa - and thought it may be of some use or interest to members here, especially for anyone contemplating say an alcove unit.
NB: The link above is a 'view only' share; please be sure to read the text on the large grey panel that appears (can take a moment sometimes) as it contains instructions on how you should proceed to get hold of your own, editable copy of the workbook.
Anyone with a modicum of spreadsheet/formula experience should be able to figure out what’s going on, but if you need more help there’s a walkthrough video here - https://youtu.be/VwMKHSG88RI
Enjoy!
Best, Pete
