lathe service required

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xXFIRE_WIREXx

Member
Joined
11 Mar 2013
Messages
11
Reaction score
0
Location
Scotland
Looking to have several parts turned in aluminium rod.

Parts a pretty small but need to be accurate so cutting by hand isn't an option.

Basically this is what i am looking for (Lengths may change by a few mm)-

All parts in aluminium rod in either 8mm or 6mm diameter.

At each end i require a m3 thead tapped 5mm deep

7 x 51mm (6mm diameter)

4 x 39mm (6mm diameter)

4 x 12mm (8mm diameter)

3 x 8mm (8mm diameter)

Would be looking for 0.03 accuracy.

Thanks :D
 
Back
Top