Removing a broken machine screw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Success!!

I used an extractor in the end. The stud was not seized so it came out quite easily :)
 
DTR":3sqneu4k said:
Success!!

I used an extractor in the end. The stud was not seized so it came out quite easily :)

Great news mate!

It doesn't matter that the screw was not seized and the drama is over...this thread has served to record the many ideas from all over the country on how to do it and this is why this part of the forum is a blinkin' good idea!

Now..off you go to break something else otherwise we won't have anything to read on a cold winter's night! :mrgreen:

=D>

Jim
 
jimi43":12nhtx8b said:
Now..off you go to break something else otherwise we won't have anything to read on a cold winter's night! :mrgreen:


Rest assured that won't take long (homer) :mrgreen:
 

Latest posts

Back
Top