Bar Stool(s)

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woodbloke66

Established Member
Joined
17 Sep 2018
Messages
1,126
Reaction score
11
Location
Salisbury
Bar stools in ash, finished with a couple of coats of Osmo Raw with wax over the top, 18/8 stainless steel footrests fitted, screwed in place with A4 Torx head screws:

IMG_4226.jpg


IMG_4230.jpg


IMG_4231.jpg


IMG_4232.jpg


IMG_4233.jpg


IMG_4229.jpg


IMG_4234.jpg


IMG_4235.jpg


Based on an original design by Oscar Pipson from new Zealand, using doweled construction - Rob
 

Attachments

  • IMG_4226.jpg
    IMG_4226.jpg
    273.7 KB · Views: 855
  • IMG_4230.jpg
    IMG_4230.jpg
    254.9 KB · Views: 833
  • IMG_4231.jpg
    IMG_4231.jpg
    246.9 KB · Views: 851
  • IMG_4232.jpg
    IMG_4232.jpg
    244.6 KB · Views: 850
  • IMG_4233.jpg
    IMG_4233.jpg
    249.5 KB · Views: 832
  • IMG_4229.jpg
    IMG_4229.jpg
    242.4 KB · Views: 832
  • IMG_4234.jpg
    IMG_4234.jpg
    237.3 KB · Views: 833
  • IMG_4235.jpg
    IMG_4235.jpg
    223.7 KB · Views: 849
Nice work. Well executed. This type of stool usually has a hard life. These look like they will stand up to it.
 
phil.p":2x9ivs78 said:
Nice thin bar for scraping the mud off your boots. :D
The original design didn't have them fitted, but as they're going up to London to be installed in my son's flat, he wanted footie rests. C'est la guerre - Rob
 
marcros":18tbsad9 said:
did you use the arbourtek on these Rob?
Nope, initial shaping on the seat(s) was done with an Ax tc cutter in the angle grinder. Effective but very fierce! - Rob
 
Very nice! How are the legs connected to the seat?

Sent from my SM-G977B using Tapatalk
 
Yosarian":3kzray8j said:
Very nice! How are the legs connected to the seat?

Sent from my SM-G977B using Tapatalk

Each corner has a 150mm, 12mm dia steel dowel epoxied in place; they're going nowhere :D - Rob
 
Your a very talented woodbloke woodbloke, everything I've seen you post looks top notch to my eye =D>
 
FatmanG":17w5fnsh said:
Your a very talented woodbloke woodbloke, everything I've seen you post looks top notch to my eye =D>
Many thanks, much appreciated, but with this particular job I never want to see another bit of sandpaper again. Ever - Rob
 

Latest posts

Back
Top