Tool cabinet

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Nice job on the cabinet.

I built one to this design too, but I made it a few inches wider than the original. I made mine from 18mm birch ply (except the door frames which are oak) as I am a cheapskate! I first noticed the cabinet in Mike Pekovitch's book and took a fancy to it.

Here's a link to the original https://www.finewoodworking.com/videowo ... ol-cabinet

I did buy the plan. As others have noted, the only marginal thing is depth for the planes. I left too much space behind the door inner doors originally so the things on them clashed with a plane handle. I moved them a bit so there is now just enough space in there for the chisels.

I just need to finish it off as I still haven't got everything organised into it yet.

regards,

Colin
 
Back
Top