Mill collet??

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SVB

Established Member
Joined
2 Jul 2005
Messages
2,012
Reaction score
201
Location
Nailsworth, Glos
Folks,

Included in a mixed Box of ‘useful’ stuff. Any idea how to accurately describe / value as no use to me!

Thanks,

Simon

PS - PM if any use to someone here!
 

Attachments

  • E268859D-C1BA-454D-BF1E-1939D2728F1F.jpeg
    E268859D-C1BA-454D-BF1E-1939D2728F1F.jpeg
    117.7 KB · Views: 487
  • C59D5BCB-FD56-4CF4-A476-A7C677DBE12C.jpeg
    C59D5BCB-FD56-4CF4-A476-A7C677DBE12C.jpeg
    140.9 KB · Views: 485
That's an SK40 (refers to the taper) collet holder as you say. Would fit a largish mill or CNC machine. Would also be worth identifying what the collet type is. Looks like there is one already in it. Not sure on the value but the usual popular auction site would be a good place to look.
 
It’s not an ER series collect. This picture shows the installed collet next to an ER40 collet. It is quite a bit longer overall.
 

Attachments

  • E90F1C49-1986-4298-8105-73379F58A5B0.jpeg
    E90F1C49-1986-4298-8105-73379F58A5B0.jpeg
    168.2 KB · Views: 398
Back
Top