If you're near Nottingham or J24-J27 M1 can you please help?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Newbie_Neil

Established Member
Joined
27 Jul 2003
Messages
6,538
Reaction score
4
Location
Nottingham, England
Hi all,

I have a garden swing with a metal frame and it's in good condition, apart from the fact that the front 'legs', that fit into rubber 'feet', have rusted.

If I cut out the rust could someone please make some small pieces for me to go inside the existing 'legs'? It's probably about four or five inches of metal tube that are required, for each side.

I'll happily pay for this.

Thanks for reading,

Neil
 
Just done out of 50mm galvanised scaffold pipe turned to fit Neil’s id
3222A42F-868E-49B1-AB1C-5EB7D9290C01.jpeg
 

Attachments

  • 3222A42F-868E-49B1-AB1C-5EB7D9290C01.jpeg
    3222A42F-868E-49B1-AB1C-5EB7D9290C01.jpeg
    186.4 KB · Views: 356
Back
Top