Brian18741
Established Member
As the title says, anyone know what chuck will fit this lathe? Or what thread pattern more to the point?
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
What chuck for Woodmen SP800 lathe
- Thread starter Brian18741
- Start date
Help Support UKworkshop.co.uk:
nev
Established Member
Also possibly sold as Luna SP800 (from a little googling)
https://store.lathes.co.uk/print/ml380
https://store.lathes.co.uk/print/ml380
nev
Established Member
If it is the same as a Luna, then this list by Peter Childs... http://www.peterchild.co.uk/chucks/threads.htm
has the Luna listed as 24mmx3mm which I think is an M24 thread. So a quid or so will get you an M24 nut from eBay so you could confirm it or not?
M24 x 3 examples http://www.stilesandbates.co.uk/search. ... submit.y=0
has the Luna listed as 24mmx3mm which I think is an M24 thread. So a quid or so will get you an M24 nut from eBay so you could confirm it or not?
M24 x 3 examples http://www.stilesandbates.co.uk/search. ... submit.y=0
Brian18741
Established Member
Excellent, thank you, I shall do some experimenting!
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Brian18741
Established Member
You're bang on the money Nev, standard M24 thread!
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
