Identifying plane

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Michael b

New member
Joined
19 Nov 2018
Messages
2
Reaction score
0
Location
Horsham
21D1C0B6-8551-4CE7-93CF-673D74F1092D.jpeg
Was wondering if any one was able to help me identify/information on a plane I aquired recently. The plane has the hallmark of J welsh and the chip-breaker has J welsh and Buck & co on them, not too sure on the cutting iron was a little difficult too make out. There is a little damage to the plane as shown in photo and the cutting blade looks like someone had gone to the top of it with a club hammer but over all a nice looking plane, would just like to know a little more about it, thanks in advance for any help.
 

Attachments

  • 21D1C0B6-8551-4CE7-93CF-673D74F1092D.jpeg
    21D1C0B6-8551-4CE7-93CF-673D74F1092D.jpeg
    752.6 KB · Views: 537
  • 45833E93-2300-4DC3-90D2-420A0B7D43C0.jpeg
    45833E93-2300-4DC3-90D2-420A0B7D43C0.jpeg
    1.4 MB · Views: 533
  • CB5749E7-C479-4A32-961E-180CF5019C67.jpeg
    CB5749E7-C479-4A32-961E-180CF5019C67.jpeg
    439.7 KB · Views: 533
  • 977E0D75-203C-4B06-B797-D36DF928734A.jpeg
    977E0D75-203C-4B06-B797-D36DF928734A.jpeg
    1.2 MB · Views: 533
  • 82EAFFEB-B7B0-4383-B599-A76435B976A5.jpeg
    82EAFFEB-B7B0-4383-B599-A76435B976A5.jpeg
    398.2 KB · Views: 532
Hello Michael, and welcome to the forum!

That's an infill panel plane, and it looks to me to be user-made. Infill planes were expensive relative to a craftsman's wages, and panel planes cost more than the slightly more often found smoothing planes. They were intended for fine finishing work on harder woods by such trades as cabinetmakers, shopfitters and instrument makers (for which reason they often had very tight mouths), and as they were highly prized, it isn't unusual to find that some impecunious tradesmen made their own. User-made sometimes implies a bit shoddy, but as your example demonstrates, craftsmen often put a lot of care into making tools like these. I suspect that this plane was made by J.Welsh for his own use.

Quite a few tool dealers sold the parts to enable craftsmen to make their own planes, including cutting irons, cap-irons and screw caps. In this instance, the mark "Buck and Co" was one of several used by Buck and Hickman (according to Simon Barley's splendid book 'British Saws and Saw Makers'). Buck and Hickman was a very long-lived firm, so ascribing an exact date to it would be nigh-on impossible. Screw caps appeared in tool catalogues from sometime the 19th century until about WW2, which doesn't, of course, help us to date your plane either!

Sorry that doesn't really tell you anything definite, but I'm afraid I'm no expert on infill planes; hopefully someone with better knowledge will be along shortly.
 
Thanks for taking the time to get back to me about my plane, found your knowledge very informative and helpful than you,
 
Back
Top