Moderators: Random Orbital Bob, nev, Noel, Charley, CHJ

 Reply
User avatar
By Waka
#1198608
I have for sale a Hegner Multicut 1 Scroll saw. I've had this a few years but not really used it. Comes with the foot peddle and a multitude of saw blades.
I'm asking £220.00 for the lot. Please see photo's below.
I would suggest this is a pick up item as it's quite heavy.

IMG_0891.jpg


IMG_0892.jpg


IMG_0893.jpg
Last edited by Waka on 04 Feb 2018, 21:26, edited 1 time in total.
By NazNomad
#1199687
yanky wrote:I have two that smashed in the post. Wouldn't recommend posting.



Use a box that's a lot bigger than the saw.
Wrap the saw tightly in black bin liners.
Fill the whole box with spray expanding foam.

That's how my Delta arrived. Only took me 45 minutes to free it - completely unscathed.
User avatar
By Waka
#1199693
NazNomad wrote:
yanky wrote:I have two that smashed in the post. Wouldn't recommend posting.



Use a box that's a lot bigger than the saw.
Wrap the saw tightly in black bin liners.
Fill the whole box with spray expanding foam.

That's how my Delta arrived. Only took me 45 minutes to free it - completely unscathed.


You have a very valid point there.
By yanky
#1199726
That would be fine. Any packaging needs to withstand at minimum, being dropped from the back of the lorry. Best if it can withstand being chucked.
By donwatson
#1199826
I like the idea of a good covering of bin liners and then expanding foam to fill the box. It should work without adding a lot of weight to the package.

Don W
By NazNomad
#1199829
donwatson wrote:I like the idea of a good covering of bin liners and then expanding foam to fill the box. It should work without adding a lot of weight to the package.


I admit to being suitably impressed when I opened the box.

However, chipping all the foam off in the kitchen was, in hindsight, a dumbass move on my part. :-D
User avatar
By Waka
#1205530
Yes, this is still available, swhgen I worked out the shipping it came to £27.00 with the insurance. Where are you located?