Cheep pinless blade clamp adaptor solved

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Plodmore

Established Member
Joined
4 Oct 2017
Messages
33
Reaction score
2
Location
GLASGOW
The barrel type adaptors that ca me with my Ferm saw were a pain. Especially trying to get the bottom one through the plate. Until my new Axminster clamps arrive I simply took the neutral pin from a 13amp plug (earth was a bit bigger) and cut the screwed block off. Works a treat. I had tried the inner from a block of terminal strip but it was too small. Bigger block would work, just didn't have any to hand.

Regards
Andrew
 
Back
Top