2nd Bowl WIP

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tommo 62

Established Member
Joined
29 Sep 2017
Messages
26
Reaction score
0
Location
nottingham
Today I decided to cut one of the large logs i had in workshop.



Then attacked it with chain saw to fit on lathe. Max diameter at the min is 280mm. But I am remaking the tool system that's missing to allow large bowls to be turned. By rotating the headstock through 90deg This will allow much larger items to be turned.

Anyway got it mounted on lathe and knocked off the edges.



Set lathe very slow speed way out of balance.



Scarry when its dancing and sticking metal chisel into it :eek:



Feels a lot safer once mounted into chuck and now upped the speed some .



Will leave it to settle for while now.

tommo
 
Back
Top