Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. jimi43

    Skelton Saws

    Well now....three years on almost to the day and a 10 month waiting list. Seems there are some out there who recognise English hand crafted saws when they see them. Congratulations Shane and Jaq....well deserved! Now...about Mallard No.6
  2. jimi43

    Dewalt Bandsaw DW739 Setup and Maintenance

    Hi Joe Glad to be of help.. Just make sure that everything is very clean...and the internal (not the faces of the pulley!!) are properly lubricated with white grease and then it should work well. Unfortunately the design needs regular maintenance as the dust gets in and fouls it all up again...
  3. jimi43

    Dewalt Bandsaw DW739 Setup and Maintenance

    Hi Joe Not sure what plastic cover you mean but if you mean the plastic cover on the other side of the motor then you don't take that off. Go back through the pictures and follow the disassembly instructions taking care to take pressure off the spring as stated and remove the separate parts of...
  4. jimi43

    Inca bandsaw

    Send Ian at Tuffsaws exactly what you have written here and he will advise the best for your application. He has never steered me wrong. Also Steve Maskery's excellent bandsaw setup DVD is a must if you want to get the best out of your saw...it's worth its weight in gold...
  5. jimi43

    GoPro Hero 4 meets Richard....

    Beech Mike. John...the only input is a Mini-USB Port (supports composite A/C cable/3.5 stereo mic adapter) Other than that...I have no idea...I only wanted to use the internal mic but I will be adding a mic later when I use it in the studio. Cheers Jim
  6. jimi43

    GoPro Hero 4 meets Richard....

    I thought I would have a play with a new GoPro camera I bought...the ideas are endless... (turn the sound down a bit...) https://youtu.be/OQsFo5xXHBA Cheers Jimi
  7. jimi43

    Bronze casting infill plane WIP

    I milled a channel to the rear of the edge and then put a bevel on the front wall...then I bent the 3mm steel in a Record vise... It closes up flat when tight... Check out a video I just posted on here...using the GoPro Hero 4 camera mounted on the side... It will give you confidence in...
  8. jimi43

    Bronze casting infill plane WIP

    Liam brings up a good point about the pressure of the cap iron and I did a lot of research on this. I adopted a fixed (not two part) Clifton style milling the rear of the face of the cap iron and then bevelling the leading edge ridge. You can see this in my article on the build but if you need...
  9. jimi43

    Bronze casting infill plane WIP

    WOW! You can't BELIEVE how deja vu this all is...and mate..the first IRON I cut the centre slot by hand 2mm out too!!! That is one hell of a lot worse than only having to redo the cap iron mate! So I feel your pain...but not as much as I could...you came out lightly! I have no idea how it...
  10. jimi43

    Bronze casting infill plane WIP

    On "Richard" I simply drilled holes in the sides..countersank the holes but shallow and fitted screws so that only the part without the slot was below the surface and then filed off the tops. Worked well. If you need to remove them again...you drill out the screw..use a screw extractor to remove...
  11. jimi43

    Bronze casting infill plane WIP

    Yes...I think this type of adjuster will work better with the "Bailey" type cap because it is nowhere near as tight as a lever cap. I can't see anything with a fine thread working with a lever cap tightened enough to lock down the iron.....that is the inherent problem because the coarser you...
  12. jimi43

    Bronze casting infill plane WIP

    That'll work Richard....does it work with full clamp down on the lever cap? Jim
  13. jimi43

    Bronze casting infill plane WIP

    Great project Mark...and I will be following it closely now i know it's here. Firstly...adjuster...I have sat on the fence regarding the "Norris" adjuster for a long while..in the hope I would find one I actually liked. Well..having just bought an A71 with a near pristine adjuster with...
  14. jimi43

    Diamond or ceramic stone?

    Yes..on the XXF ones including the metal backed Dia-Sharp extra fine...I use water with a spot of washing liquid too....for the very same reason. The rest are fine dry..just blow the dust away outside.
  15. jimi43

    Bristol Design

    Darn...I thought as much. Ok..looks like plan B then...angle piece of bronze milled. I will probably work out cleaner that way anyway. Thanks for the response mate..I have to say that coffin smoother looks well cast indeed! J
  16. jimi43

    Queensland Maple.

    Hi Stewie I don't come here too often and I do miss our chats. The placement of the backstamp is no issue at all...but since you asked I felt the need to express my opinion...and it's not down to golden ratios or anything other than traditional "looks right" viewpoint. To me...having seen the...
  17. jimi43

    Bristol Design

    I know that Bristol Design did/do brass mouldings because the Prof has kindly shipped a lever cap to me for my Scottish infill smoother restoration...and a fine bit of brass it was too. Question...do you recent visitors recall seeing the casting for a Lancashire Pattern shoulder plane like the...
  18. jimi43

    Queensland Maple.

    Stunning saws Stewie..the craftsmanship I have come to expect from you my friend. As for the stamp...I'm with Andy I'm afraid...the stamp should be centred on the brass back. Cheers Jimi
  19. jimi43

    Diamond or ceramic stone?

    Hi NS Yes..the review you saw was indeed on here... CLICK CLICK ..which I wrote well over a year ago now. I am happy to report that the "stone" is still going strong...is used every day and used in conjunction with two other stones is the only sharpening system I need. For primary grinding...
  20. jimi43

    The Ad-Vice, a very special wooden vice

    The bits you bash come off and are replaceable Phil and none are beyond the capability of even a casual carpenter to replace .....such is the simplicity. I have used mine extensively for months and Douglas came over yesterday...did a quick inspection...muttered something about "leather" but...
Back
Top