Search results

Hi all. Hope everyone is well. Need some guidance, especially if anyone has experience. I am currently looking for a better and cleaner edgeband trim tool. Ideally a hand tool as funds are low. Can anyone recommend tidy and clean cutting ones ? Kind regards Marc

Hi guys, been a while since I've been on here, however I was wondering if anyone can recommend a good MFT slab, with a fairly good size of approx 5.5ft x 4.5ft

hi guys, so after a large amount of problems with my small table saw, i am currently looking for something a lot better, possibly even with a scoring blade but would like to know others thoughts. i am making cabinets with melamine and t=need that lovely chip free cut everytime, and wanted to...

hi guys i have seen a 23 ga pin nailer i would like to get but it only comes as a set with an 18ga brad nailer ( which i dont need ) so ......... i wanted to know if anyone on here would be interested in the brad nailer as i only want the 23ga pinner

hi all, am currently looking for ideas and ways to make my table saw bigger and better for larger sheet good work, and wondered if anyone wouldnt mind posting some pics of what they have done, also anyone who has made there own rip fence as would love to see them. Thank you Marc

hi all , this must be a rellly easy for some on here, but myself, never really needed clamps til now, as only just started with joinery. anywho, when i clamp 2 panels at 90deg, it seems to want to bow in and unless i am pulling back on the clamps, wont sit at 90 whilst the glue dries, it...

Hi all, was wondering where people get theyre biscuits from as got a bag of size 20 from tool station, and straight away noticed that they were made of ply, also, when i put the joint together, the joint got to be pressed with a stupid amount of pressure otherwise the joint is not going flat...

hi all, was wondering if anyone has made the rip fence that i have heard about in Steve Maskery dvd series, if so would you be bale to post any pics of it? a little bit desperate for something a tad better. Kind Regards Marc

hi guys, want some opinion here, but looking at building a workstatoin for my ts200 but want peoples opinions weather or not the motor in this thing is really worth it, doesnt seem very powerfull at all. can the motor be upgraded? is there anyway that i could increase its torque and power? on...

ok, so i work a fair bit with melamine, and only today have i heard about titebond melamine glue, any on here ever used it?? is it any good for end to face work? any help here would be great regards marc

Hi all Hope your all well. Had a crazy shock today when my table saw started smelling whilst in use. From what I can see it looks like it's because the belt is slipping constantly and then rubbing against the metalwork inside. The belt is all the way to the left ( looking at it from a...

hi all, hope you are well, so last week i made a panel sled for my ts200 so that i could cross cut some longer lengths, however i am noticing that about half way through it seems to get tougher to push through however when there is no panel on it is glides through smoothly, no grabbing. not sure...

so have been podding along today trying out the methods discussed, but still dont seem to be getting any kind of consistancy. for example if i am doing 3 biscuits in one joint, the left one might be bang on, middle slightly out, then the right one well out, i only really see this on the...

ok so i managed to get hold of a fairly good biscuit joiner, works briliantly ( on small panels ) however i am in the process of building a cabinet that is 4ft long 18 inh deep, and want to know if anyone has any idea on the best wat to do the end of the 4ft panel, as standing on end seems to...

hi all, so have had some great feedback and responses so far, so thought id fill you guys in a little more to get another question answered, so basically i work a lot with MFC, and i make reptile enclosures. basically i have spent time and time trying to use dowels to do all my joints which is...

hi all, i am currently looking for ideas on ways to upgrade the rip fence on my ts200, and was wondering if anyone can show what they have done ( in pics ), doesnt have to be the same saw, just looking for any ideas to help before i can afford to get the complete table saw DVD Regards Marc

hi all hope you are well, can anyone point me in any direction for zero clearance inserts for an axeminster ts200? have had a go at making some but not with a massive amount of joy so far. also can anyone recommend a long good fence system that i can replace the factory one with? Kind...

hi all, seen a bit of a mixed response about this subject, but what does everyone do to keep the tops of their tablesaws looking and woking well and smooth ? kind regards Marc

hi all, still learning and reading tons of stuff on here, theres soo much :) basically i notice about the americans using silicone free paste wax for treating the tops of table saws, however cant seem to find anything like the stuff, i wanted to know if anyone on here could elaborate more...

hi all, i have recently bought an axminster TS200, majorly happy with it and so far yet to find any fault with it in any way, however, i am looking to the future and would like to put a better fence on it in the next few months and wanted to know how i go about looking at getting the blade...