jsjwilson's latest activity

Be aware, there may not be anything wrong with the DC brake. They are a device that have to be configured for the specific motor and...

Here is an explanation of the principle behind DC injection braking https://electrical-engineering-portal.com/methods-braking-motor...

I can't speak for your brake so check the datasheet when you track it down. I imagine it will take any two phases (from L1, L2 and L3)...

When you say all 3 phases are present, have you been able to check that, since you found this fault? The reason I ask is that I had a...

I had a look in the starter housing, on mine, but it is a newer version, so a different arrangement for the braking, with no circuit...

Thanks again for the assistance. I took the advice offered and managed to get an industrial electrician to visit. He identified the...

Thanks. Does it matter which phases feed the break card?

Th Thanks for all your comments. Thanks too for the concern for safety. I appreciate this as I have had 2 mains shocks and I wouldn't...

This is the circuit diagram, which was tucked inside the starter, on the left hand side, between the inside of the casing and the...

Dear uk workshop friends, I am seeking some advice on getting my saw up and running. Its a TA450 Sedgwick 3 phase saw which was seen...