Recent content by fanta0575

I can manage 8x4 sheets with regards to space requirement and will rip them down with a circular saw to more manageable sizes, I want the table saw as I can then produce more detailed work to a higher standard, including rebates and utilising crosscut jigs, just need heads up advice as the...

just hope the bosch fits into the hybrid range that has the best of both worlds with regards to cabinet and jobsite applications and does not take up too much workspace!

ideally looking for a table saw so that I can use jig such as cross cut sled etc

Hi all, looking for best advice on purchase of new table saw, heard good reviews for bosch gts 10xc table saw, are there any similar or better recommendations, portability is a key consideration

Hi all, have just made some heart shaped candle holders, have applied a sanding sealer coat and sanded back. I now want a nice deep lustre polished waxed surface. I have a one plus 5 " cordless random orbital sander which gives 10,000 oscillations a minute with an orbit dia of 2.5mm. Are there...

Thanks for all your comments, i was getting slight drift with the old bandsaw blades as soon as I changed to tuff saw blade the results were perfect, i thiught it may have been my set up as you do worry about ci planing and other issues, a new blade was the remedy, just a question how long can...

have just taken the plunge and put a tuffsaw blade on my record power bs350 bandsaw, cannot believe the difference this has made, big thanks to tuffsaws and all that have recommended the blades to me, the results are amazing , if you have never used tuffsaws and your not getting accurate cuts...

thanks guys some sound advice given!

hi fellow woodworkers, i've heard you can convert a henry vaccum into a decent shop vac with an accessories pack, my bandsaw takes a 100mm dia hose. Any hints, pitfalls or general advice out there that may guide me in the right direction? thanks in advance!☺

thanks guys, this ties in with what I thought and it's reassuring to hear that this is the case with other record power bandsaws and other bandsaws alike!

hi guys, I have a record power bs350s bandsaw have adjusted tracking as best as possible and the two wheels do not co-plane, it's tracking as should be on top wheel with the backside of gullet very close to centre of wheel, the bottom wheel has the blade closer to front of wheel.The bandsaw...

thanks guys I think i'll opt for the tuffsaws in the very near future!

thanks steve for the advice, i'll see how I get on with the new blades would have bought tuff saw blades from the off as they seem to be everybody's choice, but I had a wheel kit and 3 blade set from yandles foc with the package, with the blades being recommended by mr holtham I thought I would...

are the record offering of performance blades near the quality of tuffsaw blades?

thanks guys for some sound advice, yes have only used the blade supplied with machine but had 3 record power performance blades free with the bandsaw, on recap I think i will change to the performance blades as I think they are of better quality and will then perform the tracking and tensioning...