just a newbie her but I just bought a new small bandsaw - you might want to scroll down a bit and look at my topic on bandsaw tracking - got some good replies. 20 minutes to cut 1 metre - wow something wrong there alright. I just ripped some oak about 50mm thick and it took about a minute and I...
scrit - thanks for that, very useful.
OK so I rang Axminster technical support and here's their advice which probably echos what some of you have already said. Tension the blade till it makes a note like an instrument - too little will sound flappy - too much won't ring. So I did that -...
Lee - great stuff very helpful thanks.
nola - does your blade run smack in the middle of the wheel then? Yes the mitre fence isn't brilliant but the fences are supposed to be upgraded ones from the original.
devonwoody - thanks for putting me in the picture about tpi etc
I think a call to the...
DaveL - yes I was thinking along the same lines - thanks
devonwoody - as a newbie here I don't know where everyone is coming from. I'm guessing that someohow you are associated with the said company? My main use at the moment is for ripping down hardwood planks about 25mm thick into into strips...
getting wheels coplanar might be difficult due to it having two seperate doors for access to wheels so can't get a single staright edge across them both at same time.
Ivan - you might have something there. It's hard to tell if wheel rubbers are crowned or not but they look flat to me. that...
Thanks everyone. The machine is Axminster AWSBS2 and yes it does have a tilt adjuster. I have the manual with it which tells you to set the blade to centre of the wheel. Turning the adjuster clockwise moves it to the back of the wheel. What happens is the blade tends to run with the teeth just...
Just got my new Axminster (cheapo) bandsaw and setting it up. It says to set the blade central on the top wheel. It is impossible to get it running central, it tends to go to one edge or the other no matter how fine I try to adjust. The wheels have rubber round them and I'm wondering if even if...
thanks - I think I just need a simple method like that. It's easy to get carried away looking for the perfect solution but for my purposes I don't need to be too precise.
I'm wondering about same question. As an occasional woodworker who has never really got to grips with "proper" working practises I am trying to upgrade my tools and learn a bit more.
I have an old eclipse I bought secondhand and the problem I find is that narrow chisels aren't held securely...
Hi again
Is it usual to put a micro bevel on all chisels and plane irons. What angles are best? I have a fairly good double sided oilstone but it's getting a bit hollow and some cheapo diamond stones and an old honing guide but it doesn't hold the blades square. What is a good not-too...
Hi
Does anyone know a good site that covers the use of different planes and descriptions etc. I have inherited a couple of planes and not sure what types are best for what jobs. Confused about smoothing planes, shooting planes, try planes etc.