millboyold
Member
Hi all. My dewalt 125 RAS has outfoxed me. I have had it for 20 years at least and know all the adjustments: but it has started to not cut square to the bed.... but only for the first 1 and 1/2 inches of the cut. I'm cutting 8x2 inch sepele, 90cross cut. The cuts appear square to the fence, but for the first 1 and a half inches from the fence, ( ie the start of the cut), the top of the cut leans to the right.( ie not square to the bed).. thereafter its square in all directions. I can move the fence forward or back 3 or 4 inches but the "lean" remains in the first 1.5 inches. So its not the arm, its not the bed. The blade is a new neg rake metabo. All static measurements show perfect squareness along the length of the arm. An old blade produced the same results. Its not much less than a mill but that shows with floating tennons.
Any ideas. Its driving me mad!
Ps cant feel any play adjusted roller bearings etc.
Any ideas. Its driving me mad!
Ps cant feel any play adjusted roller bearings etc.
