New life for your bandsaw blades, sharpening jig

[DennisCA]

John Heisz posted this video:
https://www.youtube.com/watch?v=GRFASuwGodE

Didn't take me long to make my own version, my blade had hit a screw once and ever since it wasn't any good so I took this chance to try and fix it:

And what a difference, this is a tuffsaws blade and still I don't think it has ever cut this good even when new. Here's some resawing I did before and after sharpening:

I'd say it took me 10 minutes to sharpen my 175" or 4445mm 3TPI blade.

 

[graduate_owner]

I'm going to try that.

K

 

[Aden30mm]

+1 for me as well, imaging getting 2 or 3 sharping out of each blade wow.

 

[gregmcateer]

That's clever.
Do you need to alternate teeth, like a a chainsaw, then come back at a different position for the other teeth?

 

[woodpig]

Good job. =D> I'm sure there are quite a few on here that couldn't be bothered to sharpen their blades but I think it's a good idea if you have the time. Being able to rejoin broken blades is another useful skill if you have a blowtorch and some brazing rod.

 

[beganasatree]

Hi Dennis,thank you for the post and the youtube link.I know what I shall be making this weekend.

Peter.

 

[beganasatree]

Hi Dennis,thank you for the post and the youtube link.I know what I shall be making this weekend.

Peter.