Parts for old coronet no 1 lathe

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

macke

Member
Joined
11 Feb 2016
Messages
6
Reaction score
0
Location
Worcsestershire
I have an old coronet lathe and on the tail stock there is a washer that retains the handwheel. It's approx 55mm x 4mm thick and the centre is a 25mm u shaped slot. On strip down to refurbish this lathe I have lost it. Any ideas where I might get one anybody?
 
Back
Top