FOR SALE: Record Coronet no 1 lathe

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cambournepete

Established Member
Joined
29 Mar 2004
Messages
2,710
Reaction score
0
Location
Rangiora, South Island, Aotearoa
I've hinted at this previously, but I'll make it more obvious :)

I want to sell my Record Coronet no 1 lathe as I've upgraded to Blister's Poolewood 28/40.

It's blue, 36" between centres with about 12" swing.
Single phase, half horse-power, Brook-Compton motor.
3 speed, changed byt moving the belt.
The head's fixed, but there's an extra foot for the bars so you can reconfigure the lathe.

It includes:
a couple of drive centres
hollow tail centre (for long hole boring)
Axminster multi-tip live tail centre
screw chuck
2 or 3 faceplates
a drill chuck
tool rests
a tool post for the Robert Sorby tool rest system
a bowl turning rest
a thread adapter for a Vicmarc chuck.

It's old but in reasonable condition.

It looks rather like this one (but is longer and blue).

It's a very good starter lathe, and will be more than some ever need or want. It will give you a good idea of want you want if you do decide to upgrade later.

It's located near Cambridge, but I could deliver anywhere between here and the Taunton area in a couple of weeks or so (Yandles :))
More local delivery is also an option as I have relatives in this area.
It's blinking heavy, so postage is definitely not an option.

I'll post some photos if anyone is interested.

I'm hoping for around £100 for the lot.
 
Looks like a dream buy for any of the guys looking to startup.


Loz
 
Hi, i'm very interested in this but would really want to get a chuck for it. You mention that it has "a thread adapter for a Vicmarc chuck" do you have a link for a chuck that would fit this?

Cheers, Rob.
 

Latest posts

Back
Top