Jig for drilling at angles help please

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BernE1

Member
Joined
6 May 2017
Messages
12
Reaction score
0
Location
Bedfordshire
I'm sure someone must of already done this.

I'm trying to work out how to make an adjustable base plate for my pillar drill.
I've got a project in mind which requires some blind holes drilled at 30 & 120 degrees.

I'm thinking of something hinged at one edge with a curved metal guide that I can lock into place (using a wing nut?).
I'll be drilling into wooden seats & rods/spindles.

Any links or suggestions will be much appreciated,

Bernard
 
Any of these suitable?
744b9d2c0d1ff78715c4b1f1bde72f96.jpg

83485bc53121408fc40060f72cc6a17b.jpg

Cheers
Coley

Sent from my SM-G900F using Tapatalk
 
Back
Top